7167 Owner’s Manual Chapter 4: Diagnostics
November 2003
64
3. Push Paper Feed Button.
4. Several lines of Rolling ASCII character will be printed.
Note: Printing will take place even when receipt cover is open.
5. Go to step 2 again to repeat this test.
To exit the Print Head Gap Adjustment Test Mode:
1. Enter the Configuration Menu again.
2. Disable the Print Head Gap Adjustment Test Mode.
3. Exit the Configuration Menu.
The printer is in Normal Mode and can communicate with the host computer.
Save Parameters
This function allows to save the selected diagnostics modes or return to the diagnostics
mode to select additional options.
Press the Paper Feed Button for the option you want.
Save new parameters ?
YES -> Long Click
NO, MODIFY -> Short Click
Emulation/Software Options
Printer Emulations
Printer emulations determine the commands that are available to the printer. They are set
by using the Configuration Menu. (See “Configuring the Printer,” for instructions on how
to enter the Configuration Menu.). The available options are:
7158 Native Mode
7156 Mode
7150 Mode
7167 Mode
Press the Paper Feed Button for the emulation you want.
** SET EMULATION ?
YES -> Long Click
NO -> Short Click
7158 Mode* -> 1 Click
7156 Mode -> 2 Clicks
7150 Mode -> 3 Clicks
7167 Native Mode -> 4 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Note: Press the Paper Feed Button for at least one second to validate the selection.
To Next Page
Loading...
