7167 Owner’s Manual Chapter 4: Diagnostics
November 2003
65
Printer ID Selections
Printer ID Selections determines the print ID that is returned from the printer. This is set
by using the Configuration Menu. (See “Configuring the Printer,” for instructions on how
to enter the Configuration Menu.). The available options are:
7158 Native ID
Emulated Print ID
7167 Native ID
Press the Paper Feed Button for the emulation you want.
** SET PRINTER ID MODE ?
YES -> Long Click
NO -> Short Click
7158 Mode ID* -> 1 Click
Emulated Printer ID -> 2 Clicks
7167 Native ID -> 3 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Note: Press the Paper Feed Button for at least one second to validate the selection
Default Lines Per Inch
This function allows the user to set the default lines per inch printed by the thermal
printer to 6, 7.52 or 8.13. (See “Configuring the Printer” for instructions on how to enter
the Configuration Menu to change this setting.)
Press the Paper Feed Button for the lines per inch you want.
** SET DEFAULT LINES PER INCH ?
YES -> Long Click
NO -> Short Click
8.13 Lines per Inch -> 1 Click
7.52 Lines per Inch* -> 2 Clicks
6 Lines per Inch -> 3 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Note: Press the Paper Feed Button for at least one second to validate the selection.
Carriage Return Usage
This function allows the printer to ignore or use the Carriage Return (hexadecimal 0D)
command depending on the application. Some applicatons expect the command to be
ignored while others use the command as a print command. (See “Configuring the
Printer” for instructions on how to enter the Configuration Menu to change this setting.)
Press the Paper Feed Button for the carriage return usage you want.
To Next Page
Loading...
