NCR 7167 - Installing the Ribbon Cassette

7167 Owner’s Manual Chapter 3: Solving Problems
November 2003
17
I
nstalling the Ribbon Cassette
1. Tighten the ribbon by turning the knob in the direction of the arrow.
2. Position the ribbon cassette slot at the catch on the printer slip frame and push it into place.
Be sure the ribbon is in front of or underneath the print head and between the print head and the
ribbon shield.
Tighten the ribbon using the shaft at the upper left corner of the cassette. Rotate the shaft
clockwise until the ribbon is positioned between the print head and the metal ribbon guide.
3. Close the front cover.
Catch
Cantilever Frame
Front
Cover
Slot
1
2
3
Slot
Slot
Catch