NCR 7167 - C) Wall Mounted Power Supply (Option)

7167 Owner’s Manual Chapter 3: Solving Problems
November 2003
6
c) Wall mounted Power Supply (Option)
The 75 watt power supply may be mounted on a vertical wall by using the holes on the cover.
Mount the screws on the wall using the following recommended mount dimensions. Use a #8 wood
screw which is to be securely fastened to a wall stud or using “Molly” fasteners (not provided).
316.20 mm
(12.50 in.)
190 mm
(7.50 in.)
174 mm
6.85 in.)
175mm (6.89 in)
75mm
(
2.95 in
)
10mm (.39 in)