7167 Owner’s Manual Chapter 3: Solving Problems
November 2003
24
• Consult your computer documentation to see if USB must be enabled in the BIOS setup.
Installing the USB Printer Drivers
Windows NT users need to run Service Pak 3 or higher for a successful installation and should exit all
Windows programs before starting.
1. Verify that the printer is plugged in and the power is on.
2. The installation varies depending on the operating system.
Windows 98
Follow the on-screen instructions. The printer beeps when the USB device is recognized. Go to the
location where you downloaded the drivers and double click the file.
To Next Page
Loading...
