7167 Owner’s Manual Chapter 6: Commands
November 2003
107
Select Receipt or Slip for Printing; Slip for MICR Read
ASCII: ESC c 0 n
Hexadecimal: 1B 63 30 n
Decimal:
27 99 48 n
Value of n :
0 Journal selected
1, 2, 3 Receipt selected
4 Slip selected
Default of n :
1
Selects the station for printing. When the slip station is selected, the printer waits (based
on the slip waiting time setting [ie: 1B 66 m n]) for the paper to be inserted. When the slip
station has already been selected and the selection is changed, the form feed roller is
opened.
If the station has already been selected and it is re-selected, no action takes place.
Example:
This statement selects the receipt for printing:
MSComm1.Output = Chr$(&H1B) & Chr$(&H63) & Chr$(&H30) & Chr$(&H01)
Exceptions:
Receiving the command discards unprinted data in the buffer, forcing a “beginning of
line” state.
When n is out of range this command and it’s supporting operands are discarded.
To Next Page
Loading...
