NCR 7167 - Page 182

7167 Owner’s Manual Chapter 6: Commands
November 2003
169
Value of n Remote Diagnostic Item Function
ASC Hex Dec
ä 84 132 Knife cut tally,
8 digit ASCII
numeric,
max 99,999,999
Write to NVRAM
à 85 133 Knife cut tally Write to NVRAM, and print on receipt to
verify
å 86 134 Knife cut tally Clear knife cut tally to 0
ç 87 135 Knife cut tally Return knife cut tally, returns 10 bytes
ê 88 136 Slip character tally,
8 digit ASCII
numeric,
max 99,999,999
Write to NVRAM
ë 89 137 Slip character tally Write to NVRAM, and print on receipt to
verify
è 8A 138 Slip character tally Clear slip character tally to 0
ï 8B 139 Slip character tally Return slip character tally, returns 10
bytes
î 8C 140 MICR read tally,
8 digit ASCII
numeric, max
99,999,999
Write to NVRAM
ì 8D 141 MICR read tally Write to NVRAM, and print on receipt to
verify
Ä 8E 142 MICR read tally Clear MICR read tally to 0
Å 8F 143 MICR read tally Return MICR read tally, returns 10 bytes
É 90 144 Hours on tally,
8 digit ASCII
numeric,
max 99,999,999
Write to NVRAM
æ 91 145 Hours on tally Write to NVRAM, and print on receipt to
verify
Æ 92 146 Hours on tally Clear Hours on tally to 0
ô 93 147 Hours on tally Return Hours on tally, returns 10 bytes
ù 97 151 Boot firmware
version
Return Boot firmware version, returns 6
bytes
ú A3 163 Flash firmware
version
Return Flash firmware version, returns 6
bytes
ñ A4 164 Flash cycles tally,
8 digit ASCII
numeric,
max 99,999,999
Write to NVRAM
Ñ A5 165 Flash cycles tally Write to NVRAM, and print on receipt to
verify
a
A6 166 Flash cycles tally Clear Flash cycles cut tally to 0