7167 Owner’s Manual Chapter 6: Commands
November 2003
172
The status bytes to be transmitted are described in the following four tables.
Printer Status (n = 1 or n = 49)
Bit Off/On Hex Decimal Status for Transmit Status
0
Off
On
00
01
0
1
Receipt paper adequate.
Receipt paper low.
1
Off
On
00
02
0
2
Receipt paper adequate.
Receipt paper low.
2
Off
On
00
04
0
4
Receipt paper present.
Receipt paper exhausted.
3 Off
On
00
08
0
8
Receipt paper present.
Receipt paper exhausted.
4 Off 00 0 Not used. Fixed to off.
5 Off
On
00
20
0
32
Slip leading edge sensor: paper present
Slip leading edge sensor: no paper.
6 Off
On
00
40
0
64
Slip trailing edge sensor: paper present
Slip trailing edge sensor: no paper.
7 Off 00 0 Not used. Fixed to off.
Cash Drawer Status (n = 2 or n = 50)
Bit Off/On Hex Decimal Status for Transmit Status
0
Off
On
00
01
0
1
One or both cash drawers open.
Both cash drawers closed.
1
Off
On
00
02
0
2
One or both cash drawers open.
Both cash drawers closed.
2 - - - Undefined
3 - - - Undefined
4 Off 00 0 Not used. Fixed to off.
5 - - - Undefined
6 - - - Undefined
7 Off 00 0 Not used. Fixed to off.
Slip Paper Status (n = 3 or n = 51)
Value of Byte Returned Slip Status
0 There is no more printing space on the current slip,
or the slip paper is not selected.
1 to 8 Remaining print area on the current slip, in number
of lines, at the currently set line spacing, when the
trailing edge sensor has become uncovered.
Until the trailing edge sensor becomes uncovered the
value reported will be 6, because there are at least 6
lines remaining.
There can be 7 or 8 lines remaining when the slip line
spacing has been set to less than 7.2 lines per inch.
To Next Page
Loading...
