NCR 7167 - Page 198

7167 Owner’s Manual Chapter 6: Commands
November 2003
185
Second Byte (Error information)
Bit Off/On Hex Decimal Status for ASB
0 - - - Undefined
1 - - - Undefined
2 Off
On
00
04
0
4
No Mechanical Error
Mechanical Error Occurred
3 Off
On
00
08
0
8
No knife error.
Knife error occurred.
4 Off 00 0 Not used. Fixed to off.
5 Off
On
00
20
0
32
No unrecoverable error.
Unrecoverable error occurred.
6
Off
On
00
40
0
64
No recoverable error occurred
Recoverable error occurred:
Receipt cover open
Cassette cover open
Receipt paper exhausted
Thermal print head temp out of
range.
Power supply voltage out of range.
7 Off 00 0 Not used. Fixed to off.
Third Byte (Paper Sensor Information)
Bit Off/On Hex Decimal Status for ASB
0 Off
On
00
01
0
1
Receipt paper adequate
Receipt paper low
1 Off
On
00
02
0
2
Receipt paper adequate
Receipt paper low
2 Off
On
00
04
0
4
Receipt paper present.
Receipt paper exhausted.
3 Off
On
00
08
0
8
Receipt paper present
Receipt paper exhausted
4 Off 00 0 Not used. Fixed to off.
5 Off
On
00
20
0
32
Slip leading edge sensor: paper present
Slip leading edge sensor: no paper
6 Off
On
00
40
0
64
Slip trailing edge sensor: paper preset
Slip trailing edge sensor: no paper.
7 Off 00 0 Not used. Fixed to off.