EasyManuals Logo

NCR 7197 User Manual

NCR 7197
280 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #192 background imageLoading...
Page #192 background image
Chapter 6: Commands 7197 Owner’s Guide
February 2002
174
Flash Download Commands
These commands are used to load firmware into the printer.
The commands are listed in numerical order according to their hexadecimal codes. Each
command is described and the hexadecimal, decimal, and ASCII codes are listed.
There are three ways to enter the Download Mode.
1. Powering the printer up with DIP Switch 2 up.
2. While the printer is running normally, use the command Switch to Flash Download
Mode, to leave normal operation and enter the Download Mode.
3. If the Flash if found corrupted during Level 0 diagnostics the Download Mode is
automatically entered after the printer has reset.
The printer never goes directly from the Download Mode to normal printer operation. To
return to normal printer operation either the operator must turn the power off and then on
to reboot or the application must send a command to cancel Download Mode and reboot.
Switch to Flash Download Mode
ASCII:
ESC [ }
Hexadecimal:
1B 5B 7D
Decimal:
27 91 125
Puts the printer in Flash Download Mode in preparation to receive commands controlling
the downloading of objects into Flash Memory. When this command is received, the
printer leaves normal operation and can no longer print transactions until the Reboot the
Printer command (1D FF) is received or the printer is rebooted.
This command does not affect the current communication parameters. Once the printer is
in Flash Download Mode, this command is no longer available.
Example:
MSComm1.Output = Chr$(&H1B) & Chr$(&H5B) & Chr$(&H7D)
Request Printer ID
ASCII:
GS NUL
Hexadecimal:
1D 00
Decimal:
29 0
Returns ACK (06 hex) + 12 bytes ASCII string describing the Flash Memory Boot Sector
Firmware part number. Ex : 189-1234567A
Example:
MSComm1.Output = Chr$(&H1D) & Chr$(&H00)

Table of Contents

Other manuals for NCR 7197

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NCR 7197 and is the answer not in the manual?

NCR 7197 Specifications

General IconGeneral
Paper Width80 mm
ConnectivitySerial
Print TechnologyThermal
InterfaceRS-232
Resolution203 x 203 dpi

Related product manuals