NCR 7197 - Main Menu

7197 Owner’s Guide Chapter 4: Diagnostics
November 2002
47
Press the paper feed for the configuration you want.
Defaults are marked with asterisk (*).
******** Main Menu ********
*******************************
Select a sub-menu:
- EXIT -> 1 Click
- Print Current Configuration -> 2 Clicks
- Set Communication Interface -> 3 Clicks
- Set Diagnostics Modes -> 4 Clicks
- Set Emulation/Software Options -> 5 Clicks
- Set Hardware Options -> 6 Clicks
- Set Default Code page -> 7 Clicks
- Set EEPROM To Default Settings -> 8 Clicks
Enter code, then hold Button DOWN
at least 1 second to validate