Chapter 6: Commands 7197 Owner’s Guide
February 2002
72
By Function
All items in BOLD are new or have additional functionality when compared to the 7193.
Printer Function Commands
Code (Hexadecimal) Command Page
10 Clear Printer 80
19 or 1B 69 Perform Full Knife Cut 81
1A or 1B 6D Perform Partial Knife Cut 81
1B 07 Generate Tone 82
1B 40 Initialize Printer 82
1B 63 34 n Select Sensors to Stop Printing 83
1B 63 35 n Enable or Disable Panel Buttons 83
1B 70 n p1 p2 Generate Pulse to Open Cash Drawer 84
1D 56 m Select Cut Mode and Cut Paper 84
1D 56 m n Select Cut Mode and Cut Paper 84
1F 74 Print Test Form 85
Vertical Positioning and Print
Code (Hexadecimal) Command Page
0A Print and Feed Paper One Line 86
0D Print and Carriage Return 86
14 n Feed n Print Lines 87
15 n Feed n Dot Rows 87
16 n Add n Extra Dot Rows 88
17 Print 88
1B 32 Set Line Spacing to 1/6 Inch 89
1B 33 n Set Line Spacing 89
1B 4A n Print and Feed Paper 90
1B 64 n Print and Feed n Lines
91
1D 50 x y Set Horizontal and Vertical Minimum Motion
Units
91
To Next Page
Loading...
Need help?
General
