7197 Owner’s Guide Chapter 4: Diagnostics
November 2002
57
Paper Low Sensor
Paper Low Sensor makes it possible to enable or disable the paper low sensor for
particular printer configurations.
Press the Paper Feed Button for the option you want.
** SET PAPER LOW SENSOR OPTION ?
YES -> Long Click
NO -> Short Click
Enable Paper Low Sensor* -> Long Click
Disable Paper Low Sensor -> Short Clicks
Note: Press the Paper Feed Button for at least one second to validate the selection.
Paper Width
This function allows the user to set the default paper width for the receipt thermal printer
to 58mm or 80mm wide.
Press the Paper Feed Button for the paper width option you want.
** SET PAPER WIDTH ?
YES -> Long Click
NO -> Short Click
Paper Width = 80 mm* -> 1 Click
Paper Width = 58 mm -> 2 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Note: Press the Paper Feed Button for at least one second to validate the selection.
Set Knife Option
Set the Knife option using the configuration menu. Answer No to the questions printed on
the receipt until you come to the instructions for knife option.
Caution: Be extremely careful changing any of the printer settings to avoid inadvertently
changing other settings that might affect the performance of the printer.
Press the Paper Feed Button for the option you want.
** SET KNIFE OPTION ?
YES -> Long Click
NO -> Short Click
Enable Knife* -> Long
Disable Knife -> Short
To Next Page
Loading...
