NCR 7197 - Page 71

7197 Owner’s Guide Chapter 4: Diagnostics
November 2002
59
Press the Paper Feed Button for the Default Code Page you want.
** SET CODE PAGE ?
YES -> Long Click
NO -> Short Click
Code Page 437* -> 1 Click
Code Page 850 -> 2 Clicks
Code Page 852 -> 3 Clicks
Code Page 858 -> 4 Clicks
More Options -> 5 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Code Page 860 -> 1 Click
Code Page 862 -> 2 Clicks
Code Page 863 -> 3 Clicks
Code Page 864 -> 4 Clicks
More Options -> 5 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Code Page 865 -> 1 Click
Code Page 866 -> 2 Clicks
Code Page 874 -> 3 Clicks
Code Page 1252 -> 4 Clicks
More Options -> 5 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Code Page Katakana -> 1 Click
Code Page 932 -> 2 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Note: Press the Paper Feed Button for at least one second to validate the selection.
For Asian code pages, code page 936, 949 or 950 replaces code page 932 in the above
shown menu. Only one Asian code page (Either 932, 936, 949 or 950) will exist in
firmware.
Save Parameters
This function allows to save the selected default code page selecton or return to the default
code page selecton to select additional options.
Press the Paper Feed Button for the option you want.
Save new parameters ?
YES -> Long Click
NO, MODIFY -> Short Click