Chapter 6: Commands 7197 Owner’s Guide
February 2002
78
Command Description Difference between 7193 and 7197
configured in 7193 Emulation Mode.
Graphics
printer scales the graphics to
provide the best match.
1B 5C n1 n2 Set Relative Print Position The parameter to this
command is in units of dots.
However, the command
moves and aligns to
character positions. In 7193
Emulation Mode, this
command calculates how
many character positions to
move based on the 7193
character width in dots (10)
versus the 7197 (13).
1B 61 n Select Justification This command does true dot
resolution alignment for
centering versus character-
aligned centering.
1D 2A n1 n2 d1...dn] Define Downloaded Bit
Image
In 7193 Emulation Mode,
this command scales the
incoming data to provide a
best match to the size of the
image as it printed on 7193.
1D 2F m Print Downloaded Bit Image (Same as above)
To Next Page
Loading...
