To Next Page

To Previous Page

EasyOne Pro™ / EasyOne Pro™ LAB 101

Hygiene, Cleaning, Maintenance, Disposal

Maintenance

Before each use

Before each use, visually inspect the device, the cables, the tubing and the

sensor for signs of mechanical damage. Particularly inspect the gas cylin-

der(s) and fittings.

If you detect damage or impaired functions that may adversely affect the

safety of the patient or user, do not use EasyOne Pro™ before it has been

repaired.

Once a year

The following parts must be replaced once a year (see "Start-up and Initial

Preparation" on page 20):

 the filter pack

 the gas supply tube

 the one-way valve

 the overpressure valve.

All parts are included in the "Yearly Maintenance Kit" 3000-50.50SP (see

"Order Information" on page 134).

The filter pack at the back of the device consists of the air inlet with filter

and a Nafion tube to dry the sampled gas. Open the screw on the right to

replace the filter pack (Fig. 7-1).

Fig. 7-1 Screw to replace the filter pack

Questions and Answers:

Need help?

Do you have a question about the NDD easyone pro and is the answer not in the manual?

NDD easyone pro Specifications

General