Using the Multimedia Centre -102-
To View an Image File
Visual effects Apply visual effects to the displayed image. Select Negative image, Sepia
tone, Mirror image, Soften image, Sharpen image or Emboss. If the
animation GIF is displayed, this option cannot be selected.
Press the SK1 (Save) to save the change to the image or the SK2 (Undo)
to cancel the change.
Note: Visual effects is not available when the image is CLI (120x120)
size. Neither is it available when a Mail (128x96) size image is
displayed in Small (176x144) display setting.
Image settings Slideshow timing: Sets the interval between each image for one to 30
seconds. During the slideshow, the SK1 (Pause) or SK2 (Play) is
available.
Display settings: Selects to display the image in Default size or Fit to
screen.
Repeat settings: Turns the repeat function on/off and selects the repeat
target. Select Repeat on or Repeat off. This function repeats the playlists
on the View image.
Rename Edits the file name.
File properties Displays information about the file
Delete Deletes the selected file.
To Do this
1 Choose to play a file or a playlist Select View images and press the Enter key.
2 Select an image file/playlist
3 Do any of the following
• Display the next file
Press the Right key.
• Display the previous file
Press the Left key.
• Attach the file to a message
Press the SK1 (Send).
Note: The SK1 (Send) is greyed out when the attached file is 100 KB
or larger.
• Edit the file name
Press the Options menu key and select Rename.
• End View image
Press the Clear key.
Item Description
To Next Page
Loading...
