NEC e228 - Making and Receiving a Video Call; To Make a Video Call to a PC with Webcam; To Receive a Video Call

Making and Receiving Calls -26-
To Make a Video Call to a PC with Webcam
This service is network dependent. Please contact 3 for further details.
To Receive a Video Call
Useful Tips
To Do This
1 Select the email address you want to
contact
Select the email address from the contact list, the Incoming calls/Missed
calls list, etc.
2 Start the video call Press the SK1 (Vid. call).
Note: The video call may take some time to connect. Please be patient.
The connection time also depends on how quickly the other party
answers the call.
To Do This
1 Receive a video call The phone indicates that you are receiving a video call.
2 Answer the call Press the Start key or SK1 (Answer) to answer and send the captured
image from the active camera to the other party.
Note: To answer the video call without sending your image, press the
SK2 (No video). The alternative photo is sent to the other party.
Task Steps
Making a video call using the contact list
1Press the MENU key and select Contacts or press the Up or
Down key.
2 Search and select the addressee’s phone number/email address.
3Press the SK1 (Vid. call) to dial the phone number/email
address.
Making a video call from the Missed calls
number list
1Press the Right key to display Missed calls.
2 Search and select the addressee’s phone number/email address.
3Press the SK1 (Vid. call) to dial the phone number/email
address.
Making a video call from Incoming calls
number list
1Press the Left key to display Incoming calls.
2 Search and select the addressee’s phone number/email address.
3Press the SK1 (Vid. call) to dial the phone number.
Rejecting the incoming video call 1Press the End key or press the Options menu key and select
Ignore.