NEC e228 - Network setup

-67- Changing the Settings on your e228
Network setup
(Select Network setup or press 4 on User settings menu screen)
Network setup settings allows you to change various settings related to the mobile phone network:
Item Description
Network select Selects the network operator (Public Land Mobile Network, PLMN) automatically/
manually.
When Automatic is selected, e228 automatically searches and selects PLMN in
order of priority.
When Manual is selected, a list of valid PLMNs is displayed. Select a PLMN from
the list. Your e228 establishes a connection to that PLMN. If this connection is
unsuccessful, a message requesting another selection is displayed.
Pref.networks Displays the list of PLMNs saved in the USIM card, updates the PLMN list, adds
and deletes PLMN entries, changes the access technology used for each PLMN
and changes the search priority and the entry display order. USIM list can contain
up to 50 PLMN entries. Add, Sort, Replace and Delete are provided under the
Options menu.
To change the search priority and the entry display order:
Press the SK1 (Move) on PLMN List. On PLMN Priority, select the PLMN to move
(selected PLMN is greyed out), move the cursor to destination and press the Enter
or the SK1.
Network mode Selects the mode of operation for the e228:
Automatic: e228 automatically selects the available service.
3G only: The service area is manually set only to the 3G coverage.
When you are in 2G/2.5G coverage, you can change it to 3G coverage by pressing the
.
APN Selects and edits the Access Point Name (APN) for Always-on connection.
Auto reconnect Enables automatic redialling when the first call does not connect to the other party.