-35- Entering Text
Numeric Input
Here is the example to enter 364 in a text message after changing to the Numeric Input mode.
You can also enter numbers using the multitap and the T9® text input modes by pressing and holding the keys.
Symbol Input
To open the symbol input menu, press the # key in the multitap input, the T9® input or the numeric input mode.
Highlight the line in which the symbol you want is located. You can move the highlighted line by using the 4-way navigation
key. Find the keypad character displayed above the symbol and press the key. The temporary symbol menu disappears after
inserting a symbol.
The symbol menu is displayed as follows:
You can cancel the temporary symbol menu by pressing the C key.
To Do this
1Enter 3 Press the (3DEF) key; then 3 appears.
2Enter 6 Press the (6MNO) key; then 6 appears.
3Enter 4 Press the (4GHI) key; then 4 appears.
Symbol menu
Press Right/Left navigation key to go
to Previous/Current/Next pages
To Next Page
Loading...
