NEC e228 - To Make a Video Call to a Video Capable phone

-25- Making and Receiving Calls
Making and Receiving a Video Call
Available in 3G coverage only
For further information on changing the default settings for a video call, refer to Video calls on page 64.
To Make a Video Call to a Video Capable phone
Activate Settings Press the Options menu key and select Settings to see the following
settings:
Auto answer: Turns on/off automatic answering.
Set answer key: Selects Use any key or Send key only as the call
answering key.
Auto redial: Turns on/off automatic redial.
Send DTMF tones: Enables/disables the sending of Dual Tone Multi
Frequency (DTMF) signals.
Divert to: Sets the phone number to forward the call to.
Mute: Turns on/off mute.
Receive a third call You can only receive a third call if you end one of the current/held calls.
Press the Options menu key and select the appropriate option to end
the current/held call.
To Do This
1 Enter a phone number Enter the phone number, using the keypad or the call logs. For further
information on Call Logs, refer to page 20.
2 Start the video call Press the SK1 (Vid. call).
3 Talk and focus the camera When the other party responds, hold the camera towards you and talk.
Adjust the camera position if necessary.
Note: Handsfree is set by default for video calls.
4 End the call Press the End key.
To Do This