-5- Setting up your e228
Setting up your e228
This section explains how to prepare your phone for use.
Before you use your phone you must do the following:
• Insert a valid USIM (Universal Subscriber Identity Module) card
• Charge the battery
• Insert the memory card (Memory Stick Duo™) in the side slot (optional)
• Set the date and time
This section shows you what to do step by step.
USIM Card
3 provides you with a USIM card that must be inserted into your phone.
The USIM card holder is located underneath the battery. If the USIM card is removed, then the phone becomes unusable
until a valid USIM is inserted.
Always disconnect the charger and other accessories from your phone before inserting and removing your USIM card.
To Insert/Remove the USIM Card
Ensure that the power is off. If the power is on, press and hold the End (On-Off) key until power is off.
Insert/remove the USIM card as shown in the diagram on the next page.
To Next Page
Loading...
