Electra Elite IPK II Document Revision 1
Standard View 11
1.0 ACCESSING STANDARD VIEW
To access Standard View complete one of the following:
J
Select the menu item Programming > Standard.
or…
J
Select the toolbar icon depicting the purple cog .
or…
J
Press the ‘F9’ key.
or…
J
If the Programming submenu area is currently open, select the tab depicting the
purple cog icon.
The Standard View menu will then appear in the Programming submenu area.
Standard screens are ordered alphabetically.
To view a particular Standard View screen, click on the screen name.
2.0 USING A STANDARD VIEW SCREEN
Each Standard View screen works differently. Though common methods used are:
1. Select the Standard View screen from the Standard View menu relevant to
the desired task.
2. Modify settings on the screen.
3. Apply changes.
The method in modifying settings for each screen is explained in each screens
help.
To Next Page
Loading...
