Electra Elite IPK II Document Revision 1
Standard View 27
10.0 SYSTEM TIMER CLASSES
This screen combines system data relevant to KTS Timer Classes. Timer Classes
detail sets of operation times. Trunks and extensions can be assigned as
members of these classes for each of the system Night Modes. To setup up a
Timer Class complete the following:
1. Specify a Timer Class to modify.
2. Set the various times for the class.
3. Select a Night Mode.
4. Select which trunks are members of the Time Class during the selected
Night Mode.
5. Select which extensions are members of the Time Class during the selected
Night Mode.
Timer Settings
Setup the list of timers for the given timer class. These settings are linked with
20-31. All times are in seconds.
Figure 17 Standard View - System Timer Classes
To Next Page
Loading...
