NEC ELECTRA ELITE IPK II - Transfer Type Items; Modify Filters; System Initialization; Accessing System Initialization

Electra Elite IPK II Document Revision 1
Communications 59
Transfer Type Items
Specifically select PRG Groups and/or individual PRGs from the KTS’
settings to upload. The choice of Transfer Type Items available is
governed by the Transfer Type selected.
Modify Filters
Applies a filter based on the system data modification status. The filter
only applies to system data on the PCPro side, not system data residing
in KTS memory. Refer to 7 Modification History on page 1-40 for further
information.
4.0 SYSTEM INITIALIZATION
A System Initialization resets a KTS. During an initialization all telephone calls are
dropped and all connections to WebPro, PCPro and the handset are lost. Thus an
initialization should be executed at a suitable time when the KTS is not actively in
use. PCPro can only execute an initialization when it is connected to a KTS.
4.0.1 Accessing System Initialization
When PCPro is connected to a KTS, access the System Initialization
dialog by selecting the menu item
Communications > System Initialization.
Figure 34 System Initialization Dialog