Electra Elite IPK II Document Revision 1
Communications 61
5.0 FIRMWARE UPDATE
Firmware Update automatically updates a KTS’ main software remotely at a
scheduled time. This feature saves times and effort in comparison to performing
the task manually. A Firmware Update can only occur when PCPro is connected
to a KTS.
The time to upload the firmware package file is directly related to the file size. At
present, the package file is about 10MB, so over LAN it may take several minutes.
A backup of the KTS system data should be performed before any firmware
update.
Figure 35 Firmware Update Dialog
To Next Page
Loading...
