NEC ELECTRA ELITE IPK II - Disconnecting; Download; Accessing Download

Electra Elite IPK II Document Revision 1
Communications 55
1.0.3 Disconnecting
While PCPro is connected to a KTS complete either of the following:
1. Select the menu item Communications > Connect/Disconnect.
or…
2. Select the icon depicting the connected black and yellow plugs .
or…
3. Press the ‘F5’ key.
All communications methods, excluding ‘Connect/Disconnect’, are then
disabled and the ‘Connect/Disconnect’ toolbar icon changes status to
disconnected.
2.0 DOWNLOAD
A download will pull all the data off the KTS and load it into PCPro. A download
can only occur when PCPro is connected to a KTS.
2.0.1 Accessing Download
When PCPro is connected to a KTS, access the Download dialog via
either of the following:
Ì Select the menu item Communications > Download.
or…
Ì Select the icon depicting the blue arrow .
or…
Ì Press the ‘F6’ key.