NEC ELECTRA ELITE IPK II - Creating from the Connection Accounts Dialog

Electra Elite IPK II Document Revision 1
Connection Accounts 69
1. When viewing the Connect dialog, select a Connection Type.
2. Specify settings relevant to the Connection Type.
3. Specify the User Name and Password used to allow the connection.
4. Press the Save or Save As button.
5. Assign text describing the connection.
6. Press the OK button.
2.0 CREATING FROM THE CONNECTION ACCOUNTS DIALOG
To create a Connection Account via the Connection Accounts dialog select the
menu item
Tools > Connection Accounts. When the dialog shows, complete following
step.
1. Click the Add button to create a new account.
2. Click the Properties button to modify the settings of an existing account.
3. Specify the various settings for each connection type.
Figure 41 Connection Account Dialog - Properties