NEC ELECTRA ELITE IPK II - Accessing System Data View; Using System Data

Document Revision 1 Electra Elite IPK II
38 System Data
1.0 ACCESSING SYSTEM DATA VIEW
To access System Data View complete one of the following:
J
Select the menu item Programming > System Data2.
or…
J Select the toolbar icon depicting the blue block .
or…
J Press the ‘F11’ key.
or…
J If the Programming submenu area is currently open, select the tab below
depicting the blue block icon.
The System Data View Menu will then appear in the Programming submenu area.
System Data is grouped by PRG Groups and ordered numerically via ID.
2.0 USING SYSTEM DATA
To modify System Data complete the following:
Figure 23 System Data Programming