Document Revision 1 Electra Elite IPK II
52 Communications
10 Communications
The Communications section of PCPro provides methods for the application to
communicate with KTS. These methods can be accessed through the menu item
‘Communications’.
1.0 CONNECT/DISCONNECT
Makes/breaks a connection session between PCPro and a KTS. This option
changes its functionality depending on the connection status of PCPro. The
connection status is indicated on the tool bar.
While connected, PCPro and the KTS can communicate with methods such as
Download, Firmware Update, etc.
Figure 30 Connect/Disconnect Status
Connected Signifies that PCPro is not connected to the KTS.
Disconnected Signifies that PCPro is currently connected to the KTS.
To Next Page
Loading...
