NEC ELECTRA ELITE IPK II - Accessing Connect; Using Connect

Electra Elite IPK II Document Revision 1
Communications 53
1.0.1 Accessing Connect
Connecting PCPro to a KTS is done within the Connect dialog. While
PCPro is disconnected from a KTS access the Connect dialog via either
of the following:
H Select the menu item Communications > Connect/Disconnect.
or…
H Select the icon depicting the disconnected black and yellow plugs
.
or…
H Press the ‘F5’ key.
1.0.2 Using Connect
Within the Connect dialog, make a connection by completing the
following:
Figure 31 Connect Dialog