NEC ELECTRA ELITE IPK II - Modifying a Time Frame; Time Frame Duration; Time Frame Night Mode

Electra Elite IPK II Document Revision 1
Standard View 25
8.0.4 Modifying a Time Frame
To modify a time frame in a Schedule Pattern complete the following:
1. Select the time frame to modify.
2. Place the cursor at the top/bottom of the time frame until it changes
appearance.
3. Left click then drag from the starting/ending time to the desired
change.
 Surrounding time frames can limit changes because time frames cannot overlap. To
solve this problem either remove existing time frames or modify them.
8.0.5 Time Frame Duration
To find out the duration of a time frame select it and then hold down the
left mouse button. A popup will show indicating the duration and Night
Mode.
8.0.6 Time Frame Night Mode
To find out the Night Mode of a time frame select it and then hold down
the left mouse button. A popup will show indicating the duration and
Night Mode.