NEC ELECTRA ELITE IPK II - Accessing Wizard View

Document Revision 1 Electra Elite IPK II
34 Wizards
1.0 ACCESSING WIZARD VIEW
To access Wizard View complete one of the following:
J Select the menu item Programming > Wizards.
or…
J Select the toolbar icon depicting the wand .
or…
J Press the ‘F10’ key.
or…
J If the Programming submenu area is currently open, select the tab below
depicting the wand icon.
The Wizard View Menu will then appear in the Programming submenu area.
Wizards are ordered alphabetically.