Electra Elite IPK II Document Revision 1
Standard View 23
Extensions
Lists which extensions are members of the selected Night Mode Service Group.
These settings are linked with 12-05.
8.0.1 Adding a Time Frame
To add a time frame in a Schedule Pattern complete the following:
1. On the Schedule Pattern bar, using the mouse, left click and drag from
the starting time toward the end time. A colored bar appears defining
this time frame. Keep the left mouse button down while dragging.
2. Release the left mouse button. A dialog then prompts for the Night
Mode associated with this time frame.
3. Select a Night Mode associated with this time frame.
4. The colored bar changes its color depending on the Night Mode
defined.
Each mode is assigned a different color. These colors are shown in
Figure 15 Standard View - Night Mode Switching Mode Colors.
Figure 14 Standard View - Night Mode Switching Adding Time Frame
To Next Page
Loading...
