Document Revision 1 Electra Elite IPK II
48 Multi-Assign
Example
To setup extensions 101 ~105 to have unique CAP keys across function
keys 1~8 follow the steps below:
This example assumes CAP numbers 0010 and onwards are not used and the
CAP number 0010 is the first free call appearance number).
1. Select extensions 101 to 105 from the telephone list.
2. Tick function keys 1 to 8 (i.e. tick all items in the first row of function
keys).
3. Select the Unique CAP numbers to each key option.
4. Enter 0010 in the Start with CAP number edit box. Or alternatively
click the “…” button and select CAP 0010 from the selection box.
5. Click the Apply button to trigger the assignment.
The result will be…
3.0 EXTENSION NUMBERS
The Extension Number multi-assignment dialog enables the user to set a range of
extension numbers to ports. This saves valuable time over having to enter each
extension number individually. In addition, the dialog allows the user to set blank
extensions, thus providing a convenient way of freeing extension numbers for use
by other ports.
The dialog is found under the menu item
Programming > Multi Assignment > Extension
Numbers
.
Ext 101 Ext 102 Ext 105
Key 1 = CAP 0010 Key 1 = CAP 0018 Key 1 = CAP 0026
Key 2 = CAP 0011 Key 2 = CAP 0019
…
Key 2 = CAP 0027
…… …
Key 8 = CAP 0017 Key 8 = CAP 0025 Key 8 = CAP 0033
To Next Page
Loading...
