NEC ELECTRA ELITE IPK II - Page 60

Electra Elite IPK II Document Revision 1
Multi-Assign 49
To assign a group of ports with extension numbers follow the steps below:
1. Select what type of extensions you want to apply.
2. Specify the port range over which to iterate.
3. Specify the extension number to being the assignment.
4. Click the Apply button to trigger the assignment.
Example
To assign telephone ports 001 ~ 099 with extension numbers 301~399:
1. Since we want to assign station numbers we select 11-01: Extension
Numbering as our extension type.
2. Place a 1 in the Begin at Station Port edit box.
3. Place a 99 in the End at Station Port edit box.
4. Place 301 in the Begin the assignment use the extension edit box.
5. Click Apply.
The result will be…
Port 001 = Ext 301
Port 002 = 302
Port 003 = 303
…
Port 099 = 399
Figure 28 Multi-Assignment - Extension Numbers