NEC ELECTRA ELITE IPK II - Page 62

Electra Elite IPK II Document Revision 1
Multi-Assign 51
Example
To setup extensions 101 ~105 to have function keys 1~8 set as Trunk Keys 10~18
follow the steps below:
1. Select extensions 101 to 105 from the telephone list.
2. Tick function keys 1 to 8 (i.e. tick all items in the first row of function keys).
3. Set the function type to Trunk Key.
4. In the Start with Trunk edit box type 10. Alternatively, click the “…” button
and select trunk 10 from the list.
5. Click the Apply button to trigger the assignment.
The result will be…
Ext 101 Ext 102 Ext 105
Key 1 = Trunk 10 Key 1 = Trunk 10 Key 1 = Trunk 10
Key 2 = Trunk 11 Key 2 = Trunk 11
…
Key 2 = Trunk 11
…… …
Key 8 = Trunk 18 Key 8 = Trunk 18 Key 8 = Trunk 18