NEC ELECTRA ELITE IPK II - CALL PICKUP; Group Call Pickup

Electra Elite IPK II Document Revision 1
Standard View 19
1. Select and define a Table Area within the DID Translation Table.
2. Specify the selected Table Area entries and how they are treated with DID.
3. Select the Night Mode to modify for DID.
4. Specify the Intercept Ring Group to use by the Table Area during the
selected Night Mode.
5. Select which Trunk Groups will use the Table Area during the selected Night
Mode.
6. Specify Trunk Group specific DID settings.
Table Areas
The DID Translation Table consists of 2000 entries which can be divided amongst
20 Table Areas, each being made up of a 1
st
and 2
nd
Area. Using the mouse, right
click a Table Area to define its 1
st
and 2
nd
entry ranges it uses. These settings are
linked with 22-10.
Figure 11 Standard View - DID Translation Table