1. Before Starting Setup
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows Server 2008)
1.
Before Starting Setup
This section describes available combination of service packs that EXPRESSBUILDER supports, and items that
should be confirmed at setup of operating system.
1.1
Starting EXPRESSBUILDER
Use the attached EXPRESSBUILDER to re-install the OS.
To start EXPRESSBUILDER, insert the media into the optical disk drive of the server and power on the server,
or press <Ctrl> + <Alt> + <Delete> keys to reboot the server. EXPRESSBUILDER starts from DVD.
Refer to Chapter 3 (5. Details of EXPRESSBUILDER) in the Maintenance Guide for more information.
To Next Page
Loading...
Need help?
General