3. Setting Up Windows Server 2008 R2
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows Server 2008)
3.4
Installing Starter Pack
Starter Pack contains drivers customized for this server.
Be sure to apply Starter Pack before running the system.
Important Also install Starter Pack in the following cases.
• The system configurations have changed (when internal option devices
have been added or removed)
If a dialog box prompting you to restart appears after changing system
configurations, click No and then install Starter Pack.
• If the system was restored using a restore process
• If a system has been restored using the backup tool
Note
The Scalable Networking Pack (SNP) function is disabled upon Starter Pack
installation is complete.
The setting of SNP function may affect the system performance.
Tips
If the OS is installed by using EXPRESSBUILDER, Starter Pack is already applied.
If the configuration is not changed, you do not need to apply Starter Pack again.
1. Log in to the system with the built-in administrator (or user with administrative privileges).
2. Insert EXPRESSBUILDER DVD into the optical disk drive.
3. Click Integrated Installation on the menu.
To Next Page
Loading...
Need help?
General