NEC Express 5800/R320c-E4 - Enabling os Boot Monitoring Feature

3. Setting Up Windows Server 2008 R2
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows Server 2008)
91
Chapter 1 Installing OS
3.13 Enabling OS Boot Monitoring Feature
Enables OS Boot Monitoring feature.
Set OS Boot Monitoring feature to Enabled on BIOS SETUP according to Chapter 1 (3.1.3 Disabling OS Boot
Monitoring Feature). Then, specify the timeout time for OS Boot Monitoring Timeout parameter appropriately.
Tips
Specify the timeout time in seconds. Default setting is 600 seconds (10 minutes).