3. Setting Up Windows Server 2008 R2
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows Server 2008)
3.6
Installing Applications
EXPRESSBUILDER contains applications including NEC ESMPRO Agent and NEC ESMPRO Manager. Some
applications stored in EXPRESSBUILDER can be installed collectively by performing the procedures described
below. When installing these applications individually, see Chapter 2 (Installing Bundled Software). This feature
is available only on the server with Full Installation.
1. Logon to Windows on the server with the Built-in Administrator (or an account having administrative
privilege).
2. Insert the EXPRESSBUILDER DVD into the optical disk drive, double-click dispatcher_x64.exe in the
following folder.
<EXPRESSBUILDER>:\autorun\dispatcher_x64.exe
3. Click Integrated Installation on the menu.
4. On the following screen, select Applications, and select the check boxes corresponding to the
applications to install, and then click Install.
To Next Page
Loading...
Need help?
General