NEC Express 5800/R320c-E4 - Setup Procedure

3. Setting Up Windows Server 2008 R2
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows Server 2008)
30
Chapter 1 Installing OS
3.2.4
Setup procedure
1. Prepare for setup according to Chapter 1 (3.1.2 Preparation).
2. Be sure to disable OS Boot Monitoring feature according to Chapter 1 (3.1.3 Disabling OS Boot
Monitoring Feature).
Important OS Boot Monitoring feature is enabled by the shipping default. Setup process will
fail if this feature is enabled.
3. Turn the display unit power on, and then turn the server power on.
4. Start EXPRESSBUILDER according to Chapter 1 (1.1 Starting EXPRESSBUILDER).
5. When the following message appears, select OS installation *** default ***.
The following window appears.