3. Setting Up Windows Server 2008 R2
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows Server 2008)
3.2.2
Requirements for Setup
Prepare the following media and instruction manuals before starting setup.
Either of the following OS installation media
• NEC operating system installation media (hereafter referred to as Backup DVD-ROM)
• Microsoft operating system installation media (hereafter referred to as Windows Server 2008 R2
DVD-ROM)
(If your OS install media does not contain Service Pack 1, prepare it.)
First Steps Guide
EXPRESSBUILDER DVD
ft Server Control Software UPDATE media
Used to update ft Server Control Software. This might not be provided with your server.
Prepare if needed:
− Removable media for Windows OS parameter file
− Service Pack
(If the OS installation media contains Service Pack 1, you need not apply the service pack again.)
ft Server Control Software update module
See Chapter 1 (3.8.1 Applying ft Server Control Software Update Module) for more information.
3.2.3
Before setting up
During Setup with EXPRESSBUILDER, parameters are specified through the wizard. You can also save the
parameters as one file (a parameter file) in removable media.
Note
Read through the items in Chapter 1 (3.1 Before Starting Setup)
To Next Page
Loading...
Need help?
General