1. Bundled Software for the Server
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows Server 2008)
Chapter 2 Installing Bundled Software
(i) Resetting the Upgrade Side Hardware
If the Upgrade Side system hangs up while the system is operating with the Split mode, you can reset the
Upgrade Side hardware by clicking Reset button.
By resetting the Upgrade Side hardware, the system recovers.
Important
• Do not reset the Upgrade Side hardware on the following cases:
– When the Upgrade Side does not reboot properly.
– When the remote connect
ion from Production Side to the Upgrade Side does
not set up properly.
– When the Upgrade Side hangs up.
• If you reset the hardware while the Upgrad
e Side is working properly, the
Upgrade side may not launch properly.
If this occurs after resetting the
hardware, press Abort button to interrupt
the Active Upgrade, then retry the
Active Activate from the start.
• Do not reset the hardware while split. If the hardware is reset while split, the spilt
may fail. If this occurs, select Abort button to interrupt the Active Upgrade, then
retry the Active Upgrade.
(j) Managing Your Applications on the Production Side
• While the system is split, you can continue to access and use your applications on the Production Side
Important
• You must avoid doing any of the following on the Production Side desktop:
– Installing or upgrading software.
– Creating or modifying any files on the system disk, including the system
registry.
– Restarting the operating system.
• Any changes you make to files on the Production Side system disks will be lost
during the commit process, because the system overwrites these system disks
(which contain the old version of your software) with the newer Upgrade Side
disks to complete the upgrade. If you need to preserve files from the original
system disks, you can save them to a data disk.
• Be careful when switching between
the Production Side desktop and the remote
connection to the Upgrade Side desktop. When you resume software installation
or restart the system, always ensure that you are on the Upgrade Side.
To Next Page
Loading...
