3. Setting Up Windows Server 2008 R2
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows Server 2008)
4. When POST proceeds, the following message appears at lower left of the screen.
Press <F2> SETUP, ... (The on-screen message depends on your system environment.)
If you press <F2>, SETUP will start after POST, and the Main menu appears. (You can also start SETUP
by pressing <F2> key while expanding option ROM.)
Example:
5. When you move the cursor onto Server, the Server menu appears.
6. Move the cursor onto OS Boot Monitoring and press Enter.
7. Among the parameters, choose Disabled and press Enter.
To Next Page
Loading...
