3. Setting Up Windows Server 2008 R2
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows Server 2008)
(3) Check the settings specified for Basic Settings.
Modify the settings as needed, and then click Next.
(4) Check the settings specified for Partition Settings.
Modify the settings as needed, and then click Next.
Important
•
– Specify a partition size larger than the minimum required for installing the
operating system. (See Chapter 1 (3.1 Before Starting Setup).)
– Specify a partition size not exceeding 2,097,152MB.
• The entire contents of the destination hard disk drive will be erased.