3. Setting Up Windows Server 2008 R2
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows Server 2008)
13. The setup process starts.
Click Start to continue setup.
Proceed with setup according to on-screen message.
14. Insert the OS installation media into the disk drive, and then click OK.
15. The server reboots automatically.
16. The system starts from the OS installation media.
If an operating system is already installed on the hard disk drive, the message “Press any key to boot
from CD or DVD…” is displayed on the top of the screen. Press <Enter> key to boot from OS installation
media.
The boot sequence proceeds and the message “Windows is loading files…” appears.
Note If “Windows is loading files...” message does not appear, <Enter> key was not pressed
correctly. Reboot and retry.
This step is unnecessary if no operating system exists.
To Next Page
Loading...
