5-54 Installing and Using Utilities
Procedure in NEC ESMPRO Manager
The [Dump] button of NEC ESMPRO Manager performs the function of “saving dump during
system operation.”
However, this function is not supported in the current version.
1. Select [CPU Module] in the [ft] tree.
2. Check the current state with the “State” display on the target component screen.
3. Click the [Dump] button in the [Maintenance] screen for the target component.
A certain time is required for the dump saving.
The dump is stored under the directory of /var/crash/ on the managed server.
The result of the dump saving is reported by the NEC Express5800/ft series as an alert.
Sample screen of NEC ESMPRO Manager
[Maintenance] screen of CPU module
[CPU Module] – [Maintenance]
To Next Page
Loading...