Installing and Using Utilities 5-55
Procedure in ft server utility
This function is not supported in the current version.
1. Select the target CPU module by using the ft server utility.
2. Check the current state of the target CPU module with the LEDs.
3. Select the dump acquisition method with [Dump] of the target CPU module and click the
[Harvest] button.
A certain time is required for the dump acquisition.
The dump is stored under /var/crash/ directory on the server.
The result of the dump acquisition can be viewed in the syslog.
Sample screen of ft server utility
[CPU Module]
To Next Page
Loading...